04 Feb 2016

Doppstadt AK510

The high throughput and the patented load sensing material feed permit using the machine for various grinding tasks. Whatever your application: With the AK you will achieve an optimum and efficient recovery of secondary raw materials.

The Doppstadt grinders stand out for their free swinging flail holders with separately replaceable wearing tools and the heavy gyrating mass of the flail drum working at approx. 1,000 rpm.

 

Main Advantages

  • Easy maintenance thanks to large protection doors on all sides and central lubrication.
  • Separate drives for scraper floor and feed-in roller optimizing the material feeding and the  throughput.
  • Hydraulic support, controlled without engine power by an electric 24 Volt pump.
  • Short setup times (< 10 min.) thanks to the hydraulically foldable discharge conveyor*, optional magnetic pulley for Fe-separation*.
  • continuous grinding by means of load-sensing material in-feed
  • resistant against contaminants thanks to free-swinging flails
  • individually replaceable wearing tools (flails)
  • quick-changing system for grinding basket
  • minimized dust and noise emissions in the drive area thanks to the separation of drive and grinding unit
  • can be combined with other Doppstadt products
  • one-man operation (remote control of all main functions )

Machine Specs

Make Model Input Output
Doppstadt AK510 Up to 300mm Up to 100tph
Material
Wood, Compost

Have you found the right Machine?

04 Feb 2016

Doppstadt DW3060

The shredding by means of roller and comb is suitable for the most difficult tasks. Roller teeth made of wear-resistant steel tear the material through the shredding comb. The comb opens automatically if necessary in order to avoid damages by large unshreddable contaminants. All the wear parts are quickly and easily replaceable.

The engine and aggragates of the DW shredders are easily accessible from two sides. The powerful direct drive with electric reversing function provides for a high throughput.

The self-cleaning cooler is easily accessible and its noise level is very low thanks to the large low-speed fan. With their rear conveyor, which can be folded out hydraulically, the DW shredders are ready to go in no time. Magnets for iron separation are also available optionally. A multifunctional display shows the machine data and enables a easy machine operation.

An optional remote control is available.

The roller of the DW 3060 TYPE D has a length of 3 m (9′ 10″) and it rotates at 31 rpm. 21 roller teeth and 22 comb teeth shred the materials.

Main Advantages

  • wide range of possible applications – shredding of various materials
  • high efficiency thanks to direct roller drive
  • resistant against contaminants
  • hydraulically controlled shredding comb, protection of the machine, high availability (contaminants are discharged)
  • low fuel consumption due to direct drive
  • can be combined with other Doppstadt products
  • one-man operation (remote control of all main functions)

Machine Specs

Make Model Input Output
Doppstadt DW3060 N/A Up to 100tph
Material
Wood, compost, waste, plastics

Have you found the right Machine?